Cheapest ✨ Diestco Heavy Duty Weatherproof Cover With Access Slits For Power Chairs ⌛

If you have an electric power chair, then you know about the difficulties of using a vehicle hoist or power lift when there is a tarp or cover on the power chair. First, you have to remove the cover, hoist your power chair, replace the cover, and so on. Monster Scooter Parts makes it all easy with these heavy-duty weatherproof covers with access slits, allowing you to use a swing-down lift or hoist.

We off these dependable covers in four sizes to match your chair, and in two slit configurations to meet your hoist requirements. The Medium will fit fine on most of today’s standard size chairs. A larger power chair requires a larger cover, and our Large size is made for wider, heavy duty machines. The X-Large is both wide and tall, and the Super Large is that and more. Our Super Large power chair cover is made especially for the heaviest bariatric power chairs. Please refer to the Specifications tab for more size detail and data, as well as the Compatibility tab for a list of some of the power chair models that our covers fit.

Medium: 38″H x 18″W x 44″L

Large: 38″H x 23″W x 44″L

X-Large: 48″H x 23″W x 44″L

Super Large: 48″H x 31″W x 44″L

We offer these heavy-duty power chair covers in four sizes to match your chair. Please refer to the Specifications tab above for the measurements.

In addition to the four different sizes, we also offer the covers in your choice of either a full back slit style or a top slit style. The full back slit works great for scooter lifts having a swing-down securing arm. They also have the convenience of letting you access the scooter’s battery tray with the weatherproof tarp in place.

The top slit style features a 6″ cut-out in the top with hook & loop secured flaps. This style allows the boom-crane & cable hoist style scooter lift to lift the power chair from its balance point without the weatherproof cover being in the way.

These covers are made from 600×300 polyester with PVC rubber backing, a superb assembly that keeps out the rain, snow, crud, and dust. With two styles choices in two sizes, it is a simple matter to find the perfect heavy-duty weather cover that still lets you use your vehicle lift.

Features & Benefits:

600×300 polyester with PVC rubber backing

Weatherproof

Strong and dependable

Easy to use and secure

1″ webbing belt

Reflective strip for visibility

Four sizes to cover any power chair

Note: If you use this cover to haul your power chair in the back bed of an open truck, then you will need to lash it down securely. A couple of bungee cords will do the trick. The bottom edge has a 1″ webbing belt for this. What you do not want is for the cover to go flapping and flopping around in the wind as this will cause a lot of unnecessary wear & tear on the fabric.

⚠ WARNING California Residents: Proposition 65 Warning

Medium
Height: 38″
Width: 18″
Length: 44″
Composition: 600×300 polyester with PVC rubber backing
Loops: 1″ webbing belt

Large
Height: 38″
Width: 23″
Length: 44″
Composition: 600×300 polyester with PVC rubber backing
Loops: 1″ webbing belt

X-Large
Height: 48″
Width: 23″
Length: 44″
Composition: 600×300 polyester with PVC rubber backing
Loops: 1″ webbing belt

Super
Height: 48″
Width: 31″
Length: 44″
Composition: 600×300 polyester with PVC rubber backing
Loops: 1″ webbing belt